Home Assistant installation and setup
Home Assistant is the most popular open-source smart home platform: it works with thousands of devices, runs locally and does not tie you to any single manufacturer. We have been building smart home systems on it since 2019: in apartments and family houses under the Yabune Home name, and in apartment buildings and hotels as well. We select the central unit and the devices, build the network, set up the system, configure the automations and, if you wish, maintain it after handover.
Who is it for?
- You know you want a Home Assistant, but you don't want to spend your weekends setting it up.
- You are building or renovating and want a system that does not depend on a manufacturer's cloud.
- You already have Home Assistant, but you would like to extend it, tidy it up, or hand it over to someone who will maintain it.
What does a Home Assistant installation include?
We build our Yabune Home systems following the same steps:
Central unit
Depending on the size of the system, Home Assistant runs on a single-board computer (Raspberry Pi) or an industrial mini PC. The weak point of a Raspberry Pi is its SD card, so for long-term reliability we reduce the amount of data written to the card or use more durable storage.
Radio devices
Zigbee and Z-Wave devices are connected through a dedicated radio controller (coordinator), and the radio network is laid out so that sensors do not drop out. Wi-Fi devices (for example Shelly modules) are placed on a separate network segment.
Integrations
We connect heating, cooling, lighting, shading, cameras and energy metering. Where Home Assistant cannot talk to a device on its own, we write our own integration; this is how the integration for Computherm Wi-Fi thermostats was made.
Network
A stable Home Assistant system starts with a good network: we usually build the Wi-Fi and the wired network from TP-Link Omada devices, with a coverage plan.
Automations and interfaces
We create an interface organized by rooms that every member of the family can understand, and tailor scenes and schedules to your family's daily routine.
Backup and remote access
We make a backup of the system at handover. Remote access is provided over an encrypted connection, not through a manufacturer's cloud; at home the system works without internet.
Handover and documentation
You receive the installation and handover document and the user manual, and we fine-tune the system free of charge for 30 days after handover.
Existing Home Assistant system
If you already run Home Assistant, we can work with that too: we extend it, connect new devices, and tidy up the interface and the automations. If your system was built by a previous installer and has been left on its own, we audit, restore and document it following the process described on the system takeover page.
What happens to the system after handover?
You can choose between two paths. With one of the Yabune Service packages we keep maintaining it: we monitor the state of the system, make regular backups, and test updates before installing them. If you prefer to look after it yourself, the system is yours: on request you also get full administrator access, and it keeps working without our infrastructure. Because it is built on open-source Home Assistant, any specialist familiar with Home Assistant can take it over.
Frequently asked questions about Home Assistant installation
How much does a Home Assistant installation cost?
There is no flat price: it depends on which areas the system should control, how many devices it includes, whether we work during construction or in a finished home, and whether you want ongoing operation. After the consultation you receive an itemized quote with separate lines for devices, labor and operation. We explain the cost factors in more detail on the FAQ page.
Raspberry Pi or mini PC?
For a smaller apartment and a few dozen devices a Raspberry Pi is enough, provided it is set up for long-term operation. For a larger house, many devices, cameras or long data retention we recommend a mini PC.
Does it need internet or a subscription cloud?
No. Home Assistant runs locally; scenes and automations work without internet. An internet connection is only needed for remote access, which we provide over our own encrypted connection.
Do you work with wired or wireless devices?
Both. In new builds the wired solution is more durable, while in a finished home wireless modules hidden behind the switch let us work without opening walls. Home Assistant handles both on the same interface.
What happens if Yabune ceases to exist?
The system remains yours and keeps working: it is built on an open-source platform, you have the documentation, and on request you also get full access.
Where do you install Home Assistant?
We are based in Budapest, but we work across the whole country.
Want Home Assistant, or need your existing system sorted out? Tell us what you are planning and we will get back to you.